Coloured Stone
Specifications
Curing Time
This product will normally cure in 2 hours at 15 °C to accept light foot traffic. Full wear resistance is achieved over 7 days (at a minimum constant temp of
15 °C). Water should not be allowed to lie on the surface for at least 7 days.
Coloured Stone Make Up
1. Sub Base
2. Resin (pigment to suit coloured stone)
3. Coloured Stone
4. Seal Coat
2. Resin (pigment to suit coloured stone)
3. Coloured Stone
4. Seal Coat
Sub Base Requirements for Tarmac (Depending on usage)
Private Driveways
1. Surface Course - Trowel applied resin and hand scattered aggregate applied by DriveStone or an approved installer
2. Binder Course - Laid by others in well compacted layers to minimum fall of 1.5%. A 50mm depth of hot rolled asphalt (HRA)
3. Sub Base - Laid by others in well compacted layers to minimum fall of 1.5%. A 150-225mm depth of well-compacted non-frost susceptible Type 1 granular sub base to SHW claue 803 or locally available secondary recycled aggregates which comply with the requirements of the specification for highway works for sub bases
4. Sub Grade
2. Binder Course - Laid by others in well compacted layers to minimum fall of 1.5%. A 50mm depth of hot rolled asphalt (HRA)
3. Sub Base - Laid by others in well compacted layers to minimum fall of 1.5%. A 150-225mm depth of well-compacted non-frost susceptible Type 1 granular sub base to SHW claue 803 or locally available secondary recycled aggregates which comply with the requirements of the specification for highway works for sub bases
4. Sub Grade
Pathways
1. Surface Course - Trowel applied resin and hand scattered aggregate applied by DriveStone or an approved installer
2. Binder Course - Laid by others in well compacted layers to minimum fall of 1.5% A 50mm depth of hot rolled asphalt (HRA)
3. Sub Base - Laid by others in well compacted layers to minimum fall of 1.5%. A 100mm depth of well-compacted non-frost susceptible Type 1 granular sub base to SHW claue 803 or locally available secondary recycled aggregates which comply with the requirements of the specification for highway works for sub bases
4. Sub Grade
2. Binder Course - Laid by others in well compacted layers to minimum fall of 1.5% A 50mm depth of hot rolled asphalt (HRA)
3. Sub Base - Laid by others in well compacted layers to minimum fall of 1.5%. A 100mm depth of well-compacted non-frost susceptible Type 1 granular sub base to SHW claue 803 or locally available secondary recycled aggregates which comply with the requirements of the specification for highway works for sub bases
4. Sub Grade
Access Road
1. Surface Course - Trowel applied resin and hand scattered aggregate applied by DriveStone or an approved installer
2. Binder Course - Laid by others in well compacted layers to minimum fall of 1.5% A 50mm depth of hot rolled asphalt (HRA)
3. Road Base - Laid by others in well compacted layers to minimum fall of 1.5%. A 70 mm depth of AC 32 dense base asphalt concrete max 100/150 pen to BS EN 13108-1:2006 (bituminous macadam)
4. Sub Base - Laid by others in well compacted layers to minimum fall of 1.5%. A 200-350mm depth of well-compacted non-frost susceptible Type 1 granular sub base to SHW claue 803 or locally available secondary recycled aggregates which comply with the requirements of the SHW works for sub bases
5. Capping Layer (if required)
6. Sub Grade
2. Binder Course - Laid by others in well compacted layers to minimum fall of 1.5% A 50mm depth of hot rolled asphalt (HRA)
3. Road Base - Laid by others in well compacted layers to minimum fall of 1.5%. A 70 mm depth of AC 32 dense base asphalt concrete max 100/150 pen to BS EN 13108-1:2006 (bituminous macadam)
4. Sub Base - Laid by others in well compacted layers to minimum fall of 1.5%. A 200-350mm depth of well-compacted non-frost susceptible Type 1 granular sub base to SHW claue 803 or locally available secondary recycled aggregates which comply with the requirements of the SHW works for sub bases
5. Capping Layer (if required)
6. Sub Grade
Sub Base Requirements for Cement (Depending on usage)
1. Surface Course - Trowel applied resin and hand scattered aggregate applied by DriveStone or an approved installer
2. PAV1/C30 Concrete for pathways and landscaped areas. PAV2/C35 Concrete for access roads and private driveways. Thickness depends on usage
3. Metal Road Matting. Required on Medium - Heavy use areas
4. Damp proof membrane
5. 100-150mm of compacted Type 1 Granular sub-base
6. Sub Grade
Typical construction for fibre-reinforced slab. Maximum size approx 6m x 3m. Should not exceed 20m square.
2. PAV1/C30 Concrete for pathways and landscaped areas. PAV2/C35 Concrete for access roads and private driveways. Thickness depends on usage
3. Metal Road Matting. Required on Medium - Heavy use areas
4. Damp proof membrane
5. 100-150mm of compacted Type 1 Granular sub-base
6. Sub Grade
Typical construction for fibre-reinforced slab. Maximum size approx 6m x 3m. Should not exceed 20m square.